Macro-Therm 32
Macro-Therm 32 is a synthetic, heat transfer fluid that is more efficient than mineral oil-based fluids. Its thermal conductivity
(0.121 BTU/hr ft °F at 400°F) is 50 to 100 percent higher than many widely used heat transfer fluids. This means that heat goes in and comes out of Macro-Therm 32 much more quickly. A pound of Macro-Therm 32 can hold 30 + percent more heat with its specific heat of 0.665BTU/lb.
°F at 400°F. Macro-Therm 32 can safely be used in open systems up to 400°F and in closed systems under inert gas at 700°F. Fluid life
and system cleanliness can greatly be enhanced when Macro-Therm 32 is used with inert gas (nitrogen, etc.) blanketing. Its low temperature fluidity eliminates the need to drain fluid during cold weather shutdowns, a common problem with many heat transfer fluids.
System using Macro-Therm 32 are both safer and cleaner. Macro-Therm 32 higher flash as up to 25% more heat is removed than comparable petroleum heat transfer oils. Systems remain cleaner as Macro-Therm 32 minimizes carbon deposits assuring superior heat transfer efficiency. Macro-Therm 32 is environmentally responsible. All components comply with TSCA, EPA and OSHA requirements.
Macro-Therm 32 is a synthetic, heat transfer fluid that is more efficient than mineral oil-based fluids. Its thermal conductivity
(0.121 BTU/hr ft °F at 400°F) is 50 to 100 percent higher than many widely used heat transfer fluids. This means that heat goes in and comes out of Macro-Therm 32 much more quickly. A pound of Macro-Therm 32 can hold 30 + percent more heat with its specific heat of 0.665BTU/lb.
°F at 400°F. Macro-Therm 32 can safely be used in open systems up to 400°F and in closed systems under inert gas at 700°F. Fluid life
and system cleanliness can greatly be enhanced when Macro-Therm 32 is used with inert gas (nitrogen, etc.) blanketing. Its low temperature fluidity eliminates the need to drain fluid during cold weather shutdowns, a common problem with many heat transfer fluids.
System using Macro-Therm 32 are both safer and cleaner. Macro-Therm 32 higher flash as up to 25% more heat is removed than comparable petroleum heat transfer oils. Systems remain cleaner as Macro-Therm 32 minimizes carbon deposits assuring superior heat transfer efficiency. Macro-Therm 32 is environmentally responsible. All components comply with TSCA, EPA and OSHA requirements.
Macro-Therm 32 is a synthetic, heat transfer fluid that is more efficient than mineral oil-based fluids. Its thermal conductivity
(0.121 BTU/hr ft °F at 400°F) is 50 to 100 percent higher than many widely used heat transfer fluids. This means that heat goes in and comes out of Macro-Therm 32 much more quickly. A pound of Macro-Therm 32 can hold 30 + percent more heat with its specific heat of 0.665BTU/lb.
°F at 400°F. Macro-Therm 32 can safely be used in open systems up to 400°F and in closed systems under inert gas at 700°F. Fluid life
and system cleanliness can greatly be enhanced when Macro-Therm 32 is used with inert gas (nitrogen, etc.) blanketing. Its low temperature fluidity eliminates the need to drain fluid during cold weather shutdowns, a common problem with many heat transfer fluids.
System using Macro-Therm 32 are both safer and cleaner. Macro-Therm 32 higher flash as up to 25% more heat is removed than comparable petroleum heat transfer oils. Systems remain cleaner as Macro-Therm 32 minimizes carbon deposits assuring superior heat transfer efficiency. Macro-Therm 32 is environmentally responsible. All components comply with TSCA, EPA and OSHA requirements.